Default environment of U-Boot

This is the result of the printenv command from a untouched U-Boot:

Marvell>> printenv
baudrate=115200
loads_echo=0
ipaddr=10.4.50.165
serverip=10.4.50.5
rootpath=/mnt/ARM_FS/
netmask=255.255.255.0
CASset=min
MALLOC_len=1
ethprime=egiga1
bootargs_end=:::DB88FXX81:eth0:none
image_name=uImage
standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end) $(mvPhoneConfig); bootm 0x2000000;
ethmtu=1500
eth1addr=00:50:43:00:02:02
eth1mtu=1500
mvPhoneConfig=mv_phone_config=dev0:fxs,dev1:fxs
mvNetConfig=mv_net_config=(00:11:88:0f:62:81,0:1:2:3),mtu=1500
usb0Mode=host
yuk_ethaddr=00:00:00:EE:51:81
nandEcc=1bit
netretry=no
rcvrip=169.254.100.100
loidaddr=0x02000000
autoload=no
bootargs_root=ubi.mtd=2,2048 root=ubi0:rootfs rootfstype=ubifs init=/linuxrc
console=console=ttyS0,115200
mainlineLiNux=no
fw_up=disable
bootcmd=nand read.e 0x800000 0x100000 0x300000; setenv bootargs $(console) $(bootargs_root); bootm 0x800000
ethaddr=XX:XX:XX:XX:XX:XX #Replace with your own MAC address
stdin=serial
stdout=serial
stderr=serial
mainlineLinux=no
enaMonExt=no
enaCpuStream=no
enaWrAllo=no
pexMode=RC
disL2Cache=no
setL2CacheWT=yes
disL2Prefetch=yes
enaICPref=yes
enaDCPref=yes
sata_dma_mode=yes
netbsd_en=no
vxworks_en=no
bootdelay=3
disaMvPnp=no
hddPowerCtrl=no
loadaddr=0x02000000
enaAutoRecovery=no
ethact=egiga1

Environment size: 1257/131068 bytes

Reset environment to the factory defaults

Only paste one command at a time:

setenv baudrate '115200'
setenv loads_echo '0'
setenv ipaddr '10.4.50.165'
setenv serverip '10.4.50.5'
setenv rootpath '/mnt/ARM_FS/'
setenv netmask '255.255.255.0'
setenv CASset 'min'
setenv MALLOC_len '1'
setenv ethprime 'egiga1'
setenv bootargs_end ':::DB88FXX81:eth0:none'
setenv image_name 'uImage'
setenv standalone 'fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end) $(mvPhoneConfig); bootm 0x2000000;'
setenv ethmtu '1500'
setenv eth1addr '00:50:43:00:02:02'
setenv eth1mtu '1500'
setenv mvPhoneConfig 'mv_phone_config=dev0:fxs,dev1:fxs'
setenv mvNetConfig 'mv_net_config=(00:11:88:0f:62:81,0:1:2:3),mtu=1500'
setenv usb0Mode 'host'
setenv yuk_ethaddr '00:00:00:EE:51:81'
setenv nandEcc '1bit'
setenv netretry 'no'
setenv rcvrip '169.254.100.100'
setenv loidaddr '0x02000000'
setenv autoload 'no'
setenv bootargs_root 'ubi.mtd=2,2048 root=ubi0:rootfs rootfstype=ubifs init=/linuxrc'
setenv console 'console=ttyS0,115200'
setenv mainlineLiNux 'no'
setenv fw_up 'disable'
setenv bootcmd 'nand read.e 0x800000 0x100000 0x300000; setenv bootargs $(console) $(bootargs_root); bootm 0x800000'
setenv ethaddr 'XX:XX:XX:XX:XX:XX' #Replace with your own MAC address
setenv stdin 'serial'
setenv stdout 'serial'
setenv stderr 'serial'
setenv mainlineLinux 'no'
setenv enaMonExt 'no'
setenv enaCpuStream 'no'
setenv enaWrAllo 'no'
setenv pexMode 'RC'
setenv disL2Cache 'no'
setenv setL2CacheWT 'yes'
setenv disL2Prefetch 'yes'
setenv enaICPref 'yes'
setenv enaDCPref 'yes'
setenv sata_dma_mode 'yes'
setenv netbsd_en 'no'
setenv vxworks_en 'no'
setenv bootdelay '3'
setenv disaMvPnp 'no'
setenv hddPowerCtrl 'no'
setenv loadaddr '0x02000000'
setenv enaAutoRecovery 'no'
setenv ethact 'egiga1'